Graupner XS-6 PRO-SPORT Syn 40 MHz


Artikelcode: 3120



Graupner XS-6 PRO-SPORT Syn 40 MHz





Artikelcode: 3120

The set contains: 
  • Synthesizer three-function transmitter for the 40 / 41 MHz band, 
  • SR 6SYN FM-PLL Synthesizer receiver for the 40 / 41 MHz band, 
  • C 577 servo, 
  • switch harness, 
  • transmitter battery.
most important function 
Steering Rate Grip: Quick expander setting for steering travel when thumb-button is operated.
Throttle End Point Grip: Quick expander setting for throttle/brake travel when thumb-button is operated.
Model Select: The operator can make use of up to ten model memories, each separate and fully independent of the others. 
Steering Master Adjustment: Basic travel setting for the steering servo for normal running.
Throttle Deadband Adjustment: Variable neutral effect range, adjustable separately for throttle and brake functions. Enables the user to set the starting point of the throttle and brake functions accurately.
Model Name: Each model memory can be assigned an individual name to help you locate the appropriate settings.
Modulation: The transmitter offers both the standard PPN (PPN = Normal) transmission method, plus the new super-fast PPF method (PPF = Fast) for ultra-fast servo response.
Servo 3 Control Function: Wide-ranging adjustment facilities for the travel characteristics of the associated servo when the CH3 lever is operated.
Battery Alarm: If the voltage of the transmitter battery falls to a dangerous level, the transmitter emits a visual and audible warning.
Basic Display - Channel: The basic display provides information about the current battery voltage and the set transmission channel.
Basic Display - Model: The basic display provides information about the current battery voltage and the active model.
Steering Centre Trim: The neutral position of the steering servo can be very finely adjusted. The offset is shown by the direction indicator left (L) or right (R).
Throttle Centre Trim: The neutral position of the throttle servo can be very finely adjusted. The offset is shown by the direction indicator forward (F) or brake (B).
Steering to F3 Mix: A steering movement can be mixed into the third servo function. The degree of mixing can be finely adjusted.
Steering Sub-Trim: Servo centre adjustment, separately variable for each servo function.
Frequency Channel: The spot frequency can be set separately for each model. This also makes it simple and quick to chang spot frequencies at the race track, if "your" channel is already in use. 
Specification 
XS-6 PRO-SPORT Syn* transmitter
Output power 1.5 W
Transmitter frequency 22 channels, 40 MHz band 10 channels, , 41 MHz band
Operating voltage 9.6 ... 12 V
Current drain approx. 150 mA
No. of channels 3, with trims
Temperature range -15 ... +55°C
Aerial length approx. 850 mm
Dimensions approx. 180 x 24 x 85 mm
Weight incl. battery approx. 595 g

SR 6SYN 40 / 41 FM-PLL Synthesizer receiver 
Reception frequency 22 channels, 40 MHz band 10 channels, 41 MHz band
Operating voltage 4.8 ... 6.0 V
Current drain 12 mA
Spot frequencies 50 ... 92 / 411 ... 420
Channel spacing 10 kHz
Sensitivity approx. 10 µV
Modulation FM (PPM/PPF)
Servo sockets 3 Servos
Temperature range -15 ... +55°C
Aerial length approx. 600 mm
Dimensions approx. 38 x 28 x 16 mm
Weight approx. 18 g 
*After selecting the desired new spot frequency, the value must be stored by switching the receiver briefly OFF, then ON again.
Demo model now € 139,00





199.00  € 139.00




Voorraad:

Niet meer leverbaar.


Aantal